 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC695LP4 / 695LP4E SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT Typical Applications v00.0808 Features Output Power: +7 dBm Sub-Harmonic Suppression: >25 dBc SSB Phase Noise: -140 dBc/Hz Single Supply: +5V @ 60 mA 24 Lead 4x4 mm SMT Package: 16 mm2 7 FREQ. MULTIPLIERS - ACTIVE - SMT The HMC695LP4(E) is ideal for: * Fiber Optic Applications * Point-to-Point Radios * Military Radar Functional Diagram General Description The HMC695LP4(E) are active miniature x4 frequency multipliers utilizing InGaP GaAs HBT technology in 4x4 mm leadless surface mount packages. Power output is +7 dBm typical from a +5V supply voltage and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and sub-harmonics is >25 dBc typical with respect to output signal level. The low additive SSB phase noise of -140 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC695LP4(E) are ideal for use in LO multiplier chains allowing reduced parts count vs. traditional approaches. Electrical Specifi cations, TA = +25 C, Vcc= 5V Parameter Frequency Range, Input Frequency Range, Output Input Power Range Output Power Sub-Harmonic Suppression Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Icc) Pin= 0 dBm -15 2 7 25 15 8 -140 60 75 Min. Typ. 2.85 - 3.3 11.4 - 13.2 5 Max. Units GHz GHz dBm dBm dBc dB dB dBc/Hz mA 7 - 118 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC695LP4 / 695LP4E v00.0808 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT Output Power vs. Temperature @ -10 dBm Drive Level 10 Output Power vs. Drive Level 10 7 -20 dBm -15 dBm -10 dBm -5 dBm 0 dBm +5 dBm OUTPUT POWER (dBm) OUTPUT POWER (dBm) 8 8 6 +25 C +85 C -40 C 6 4 4 2 2 0 11 11.5 12 12.5 13 13.5 14 OUTPUT FREQUENCY (GHz) 0 11 11.5 12 12.5 13 13.5 14 OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ -10 dBm Drive Level 10 Input Return Loss vs. Temperature 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 OUTPUT POWER (dBm) 8 +25 C +85 C -40 C 6 Vcc=4.5V Vcc=5.0V Vcc=5.5V 4 2 0 11 11.5 12 12.5 13 13.5 14 OUTPUT FREQUENCY (GHz) 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Output Return Loss vs. Temperature 0 Harmonics @ -10 dBm Drive Level 30 Fout 1Fin 2Fin 3Fin 5Fin 6Fin 7Fin 8Fin RETURN LOSS (dB) -5 OUTPUT POWER (dBm) 10 -10 -30 -50 -70 2.75 -10 -15 +25 C +85 C -40 C -20 8 10 12 FREQUENCY (GHz) 14 16 3 3.25 3.5 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 119 FREQ. MULTIPLIERS - ACTIVE - SMT HMC695LP4 / 695LP4E v00.0808 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT SSB Phase Noise @ Pin = 0 dBm @ 12.5 GHz SSB PHASE NOISE (dBc/Hz) SSB Phase Noise @ Pin = -10 dBm @ 12.5 GHz 0 -20 SSB PHASE NOISE (dBc/Hz) -40 -60 -80 -100 -120 -140 -160 2 10 7 FREQ. MULTIPLIERS - ACTIVE - SMT 0 -20 -40 -60 -80 -100 -120 -140 -160 2 10 10 3 10 4 10 5 10 6 10 7 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz) Absolute Maximum Ratings RF Input (Vcc= +5V) Vcc Channel Temperature Continuous Pdiss (T=85 C) (derate 10.8 mW/C above 85 C) Thermal Resistance (Rth) (junction to ground paddle) Storage Temperature Operating Temperature +20 dBm +5.5V 135 C 538 mW 93 C/W -65 to +150 C -40 to +85 C Typical Supply Current vs. Vcc Vcc (V) 4.75 5.00 5.25 Icc (mA) 59 60 61 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 - 120 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC695LP4 / 695LP4E v00.0808 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT Outline Drawing 7 FREQ. MULTIPLIERS - ACTIVE - SMT 7 - 121 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC695LP4 HMC695LP4E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H695 XXXX H695 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC695LP4 / 695LP4E v00.0808 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT Pin Description 7 FREQ. MULTIPLIERS - ACTIVE - SMT Pin Number 1, 2, 5 - 14, 17, 18, 20 - 24 Function N/C Description No Connection Interface Schematic 3 RFIN RF input needs to be DC blocked only if there is an external DC voltage applied to RFIN. 4, 15 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. Multiplied Output. AC coupled. No external DC blocks necessary. Supply voltage 5V 16 19 RFOUT Vcc 7 - 122 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC695LP4 / 695LP4E v00.0808 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 11.4 - 13.2 GHz OUTPUT Evaluation PCB 7 FREQ. MULTIPLIERS - ACTIVE - SMT List of Materials for Evaluation PCB 106137 [1] Item J1 - J3 C1 U1 PCB [2] Description PCB Mount SMA Connector 1,000 pF Capacitor, 0603 Pkg. HMC695LP4(E) x4 Active Multiplier 104610 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 123 |
Price & Availability of HMC695LP4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |